Maintenance

No Heating or Hot Water From Your Boiler and What to Check

Safe checks to make when your boiler gives no heating or no hot water, the faults that usually need an engineer and what a repair visit typically costs.

Illustration of a cold living room with a radiator, thermostat and boiler

If you have a cold house or cold taps, the cause is often a simple settings issue, low pressure or a frozen condensate pipe that you can safely check yourself. Finding out what has stopped working helps you understand the problem before you pay for a call-out. If basic checks do not resolve the fault, you will need a qualified heating engineer to diagnose and repair the system safely.

If you smell gas or suspect carbon monoxide

If you suspect a gas leak, you must act immediately to keep your home safe. Call the gas emergency freephone number 0800 111 999 right away, or 0800 002 001 in Northern Ireland. Open all doors and windows to ventilate the property. Shut off the gas supply at the meter control valve if you know where it is and it is safe to do so. Do not turn electrical switches on or off, as this can create a spark.

Carbon monoxide is a poisonous gas that you cannot see, smell or taste. It is produced when gas appliances do not burn fuel properly. If you suspect carbon monoxide is leaking from your boiler, turn the appliance off, open your windows and leave the property before calling the emergency number. If anyone has symptoms, get urgent medical advice from a GP or A&E.

According to the official guidance, you should watch for specific physical warning signs. Symptoms of carbon monoxide poisoning include:

  • Headaches or dizziness
  • Breathlessness
  • Nausea
  • Loss of consciousness
  • Tiredness
  • Pains in the chest or stomach
  • Erratic behaviour
  • Visual problems

It is illegal to use a gas appliance you suspect is unsafe. Turn it off and do not use it until a Gas Safe registered engineer has checked it and confirmed it is safe to use. You can read the full safety guidance on the Health and Safety Executive website.

First checks when the boiler stops working

Before you hire a tradesperson, there are several safe checks you can make at home. Only make simple checks with minimal risk and do not attempt to fix the boiler yourself. Always refer to the manufacturer instructions for your specific system when checking settings or displays.

Check the power supply and fuses

Your boiler needs electricity to run the pump, the display and the internal circuit board. Check whether other electrical appliances in your home work. If they do not, you may be in a local power cut. If other items are working, check whether a switch or circuit breaker has tripped at the main fuse box.

If there has been a recent power cut, your boiler programmer or timer may have reset itself. Try setting the programmer to constantly on and check the time and programme settings to ensure they are correct.

Look at the thermostat

A boiler not responding to the thermostat may have incorrect settings, dead batteries or a weak signal. Check whether the thermostat is set above the current room temperature. If you have a wireless thermostat, it may need new batteries. It might also be placed too far from the boiler to communicate properly, so try moving it closer to see if the system fires up.

Read the boiler pressure gauge

Most modern heating systems are sealed and rely on water pressure to circulate heat. Check whether the pressure gauge reads below 1 bar. The needle should ideally sit around 1.5 bar when the system is cold. Below 1 bar the boiler will not work properly and may shut down completely as a safety precaution. You can learn more about this in our guide on why boiler pressure keeps dropping.

Verify your gas or oil supply

Your boiler cannot produce heat without fuel. Check that the gas emergency control valve next to the meter is in the on position. If it is on but there is no gas, call the gas emergency number 0800 111 999, or 0800 002 001 in Northern Ireland. If the supply has been disconnected for a safety reason, follow the warning notice left by the Gas Safe registered engineer.

If you have a prepayment meter, check that it has sufficient credit. You can also check whether other gas appliances work, such as a gas hob, to confirm the supply is reaching your home. On oil systems, check the oil tank level to ensure you have not run out of fuel.

Hot water but no heating

If your taps run hot but your radiators stay cold, the boiler is burning fuel but the heat is not reaching the rooms. This can be caused by the boiler being set to hot water only. Many systems have a summer setting designed to save energy by disabling the central heating entirely. Check your controls to ensure the heating is switched on.

Trapped air in radiators can also cause this problem. Air rises to the top of the system and acts as a blockage, stopping hot water from circulating through the radiator valves. If your radiators are warm at the bottom but cold at the top, they likely need bleeding.

A persistent lack of heating can also be caused by a boiler or system fault. If the problem persists after checking the settings, it needs a Gas Safe registered engineer.

Heating but no hot water

If your radiators are warm but your taps are cold, the boiler is firing up but failing to direct the heat to your water supply. This is often a faulty diverter valve on a combi boiler. The diverter valve is a moving mechanical part that shifts back and forth to send hot water to either the radiators or the taps. Over time, it can become stuck or wear out.

On other systems, such as a system boiler or a regular boiler with a hot water cylinder, the diverter valve is usually external to the boiler. In these setups, heating but no hot water is often a problem with the cylinder controls. The cylinder thermostat may be broken, or the motorised valves that control the flow of water around the pipes may have failed. If your boiler heats a hot water cylinder, the cylinder may have a backup immersion heater, which uses electricity to heat the water while you wait for a repair.

Because these faults involve internal boiler components or wired electrical parts connected to your heating system, you will need a qualified engineer to test and replace them. Do not attempt to open the boiler casing to look at the diverter valve yourself.

No heating and no hot water at all

When the system stops working completely, it can be caused by the power, gas or water supply, pressure problems, pipework, an airlock or a safety feature being triggered. Modern boilers are designed to lock out and shut down if they detect a fault that could damage the system or endanger the household.

No heating or hot water can be caused by faulty motorised valves, airlocks, low pressure or a broken thermostat. If the display panel shows a fault message, look it up in your manufacturer manual. The manual will explain what the message means and whether it needs a professional.

If the boiler appears totally dead with no lights on the display, it has likely lost its power supply entirely. If the display is on but the boiler refuses to ignite, it could be failing to detect gas, or the fan that clears waste gases through the flue might be broken. These ignition and safety faults require a Gas Safe registered engineer to diagnose.

Frozen condensate pipe in cold weather

During freezing winter weather, a common cause of total boiler failure sits entirely outside your house. Boilers installed after 2005 are usually condensing boilers. These have a condensate pipe carrying condensed water vapour outside to a drain. If the pipe freezes the boiler can break down, leaving you without hot water or gas central heating.

The condensate pipe is usually a white plastic tube that exits the wall behind the boiler and runs down the outside of the building. When the weather is very cold, the water inside can freeze and block the tube. The boiler detects that the water cannot escape and shuts down to prevent flooding internal components.

If the pipe has frozen, defrost it by holding a hot water bottle to it. Start from the end nearest the ground so the melting ice has space to drain away. Only do this where it can be reached safely from the ground. Never pour boiling water directly onto the plastic pipe, as the sudden temperature change can crack it.

Once the pipe is clear, protect it from the cold with foam insulation to stop it freezing again. You should contact a trained professional if the pipe is hard to reach or if you are unsure what to do. You can find more details on the WaterSafe national register website.

Faults that need a Gas Safe registered engineer

By law, anyone employed to work on gas appliances in homes must be a Gas Safe registered engineer and competent in that type of gas work. Never attempt gas work yourself. Do not remove the boiler casing, and do not try to relight the boiler or repair internal parts such as the ignition. Faults such as a failed ignition, a broken fan, pump or diverter valve, or a lockout that keeps coming back all need a Gas Safe registered engineer.

When a tradesperson arrives, ask to see their Gas Safe ID card. The front of the card confirms their identity and registration dates. The back of the card shows which types of appliance they are qualified to work on. An engineer might be qualified for gas cookers but not for gas boilers, so it is important to check the details match your job.

Registration can be checked by calling the Gas Safe Register on 0800 408 5500, on its website, or by texting Gas plus the engineer's seven digit licence number to 85080. If you have an oil boiler rather than a gas one, it should be repaired and serviced by an OFTEC registered installer.

What a boiler repair visit typically costs

Repairs and small jobs are usually charged by the hour or as a minimum charge, often with a call-out fee that covers the first hour. Evenings, weekends and bank holidays carry a premium. Defined jobs such as a boiler service or a boiler replacement are usually quoted as a fixed price. A quote is a fixed price you agree to in advance. An estimate is just a rough guess and can change.

Before you agree to a visit, ask the call handler or the plumber to explain their pricing structure. Tell them the symptoms and ask whether VAT, parts and materials are included in their hourly rate. Emergency call outs where no price is given before attendance often lead to disputes over the final bill.

The table below outlines what you might expect to pay for common boiler repairs. The diagnostic visit is usually included in the final bill if the repair goes ahead.

Boiler part or fault

Typical repair price

Thermostat or sensor

£120 to £250

Ignition or pilot light

£150 to £300

Fan

£200 to £400

Pump

£250 to £450

Diverter valve

£250 to £450

Expansion vessel or pressure fault

£150 to £350

PCB (main circuit board)

£300 to £550

Heat exchanger

£400 to £700 or more

Frozen or leaking condensate pipe

£80 to £200

These figures represent typical published prices for 2026, including VAT. Local quotes will differ based on the specific boiler model, the cost of the replacement parts and the engineer's travel time.

Most repairs cost £150 to £400 in the rest of the UK and £200 to £500 in London and the South East. Emergency or out-of-hours visits typically cost £120 to £300 plus parts, rising to £150 to £400 plus parts in London and the South East. Many common repairs take one to two hours once diagnosed, though larger jobs may need a second visit to fit parts ordered from a supplier. You can find more detail on weighing a repair against a replacement in our dedicated guide.

A survey of 10,064 homeowners in June 2025 found that where a repair was needed after a boiler service it cost £156 on average, while boiler cover averages £183 a year. The Health and Safety Executive advises that gas appliances are serviced at least annually. Boilers should be serviced annually by a Gas Safe registered engineer to maintain warranties and catch small faults before they cause a breakdown.

Under the Consumer Rights Act 2015, a plumbing or heating service must be carried out with reasonable care and skill. If the work is poor, the customer can ask for it to be put right at no extra cost. Services arranged by phone, online or at home usually carry a 14-day cooling-off period. However, this does not automatically apply to urgent repairs the customer has asked for. If you have concerns about a tradesperson, you can seek official guidance from Citizens Advice.

If you rent your home

If you are a tenant and your heating or hot water stops working, you should inform your landlord immediately. Landlords are responsible for repairs to gas pipes and boilers, heating and hot water, electrical wiring, sinks, baths, toilets, plumbing and drains.

Landlords must also arrange an annual gas safety check and give tenants the record. Tenants should report repairs to the landlord as soon as possible and keep a written record of all communications. Repairs must be done within a reasonable period of time, which depends on how serious the problem is. A total loss of heating in winter is a serious problem, so it should be fixed quickly.

Do not attempt to hire a plumber yourself and deduct the cost from your rent without strict legal advice, as this can put your tenancy at risk. You can find detailed guidance on your rights on the Shelter housing advice website.

Common questions

Why is my combi boiler hot water not working?

Combi boilers supply hot water directly from the mains without needing a hot water cylinder. If the central heating works but the hot water does not, the diverter valve inside the boiler is usually stuck or broken. The boiler may also be failing to detect the flow of water when you open a tap, which points to a faulty sensor.

Will a boiler work without water pressure?

No, a sealed boiler system requires adequate water pressure to function safely. If the pressure gauge drops below 1 bar, the boiler will usually lock out and shut down to prevent the system from boiling dry and damaging internal parts. The system will need repressurising before it will fire up again. The manufacturer's instructions explain how for your boiler, or a heating engineer can do it.

Can an airlock cause no hot water in the house?

Yes, an airlock in the pipework can act as a physical barrier that stops water from flowing. This trapped air prevents hot water from reaching your taps or circulating through your radiators. A plumber can clear an airlock by forcing water through the system or bleeding the affected pipes.

How often should a boiler be serviced to prevent breakdowns?

Boilers should be serviced annually by a Gas Safe registered engineer. A thorough service cleans the internal components, checks the gas pressure and ensures the flue is safely removing waste gases. Regular servicing is also usually a condition of the manufacturer warranty on new boilers.

Next steps

If you have no heating or hot water, follow this checklist to narrow down the cause safely:

  • Check your fuse box to ensure the power supply to the boiler has not tripped.
  • Check the boiler pressure gauge, and if it has dropped below 1 bar, follow the manufacturer's instructions or call a heating engineer.
  • Turn your room thermostat up and replace the batteries if it is a wireless unit.
  • Check that the gas emergency control valve is on and that other gas appliances work.
  • Defrost the condensate pipe with a hot water bottle if the weather is freezing and you can reach it safely from the ground.
  • Ask for a clear breakdown of the call-out fee and hourly rate before you agree to a repair visit.
  • Check the engineer's Gas Safe ID card when they arrive to ensure they are qualified for gas boilers.

If you have tried the basic checks and your system is still cold, it is time to find a plumber near you to diagnose the fault and get your home warm again.

Find a top rated plumber near you

4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plumbers

Kerry Evans
Written by
Kerry Evans Writer

Kerry researches and writes guides for Top Rated Plumbers, turning prices, rules and official guidance into plain advice for homeowners. She is slowly working through every Agatha Christie novel.

Looking for a trusted plumber? Browse our verified listings.

Find a Plumber