Cost Guides

Central Heating Installation Cost for a Whole House

What a full central heating system costs in 2026 by house size, what makes up the price, how long it takes, what quotes often leave out, and the rules on registration and building control.

Illustration of copper pipes on bare floorboards with new radiators and a boiler waiting to be fitted

A full gas central heating system for a typical three-bedroom home is commonly estimated at about £3,000 to £5,500 depending on the estimate, with national averages around £4,250. These figures differ between estimates and will rise for bigger houses, new pipework or a new gas supply. Fitting a completely new system is a major job that disrupts the whole house, so it pays to understand what the price covers before you invite tradespeople to quote.

When you need a whole system, not just a boiler

Replacing a boiler is a very different job from installing a full central heating system. A simple boiler swap uses your existing radiators and the pipes hidden under your floors. The engineer simply takes the old unit off the wall and connects a new one in its place.

A whole house installation means starting from scratch. You might be moving into a property that has no heating at all, or replacing ancient electric storage heaters. Sometimes, an existing wet system is so degraded with sludge and rust that the pipes and radiators are beyond repair.

In these cases, the installer must fit a new boiler, hang new radiators in every room, and run fresh copper or plastic pipework throughout the building. This involves lifting floorboards, drilling through walls and running pipes under ceilings. It is a highly disruptive process that takes days to complete.

Typical cost by house size

Because every house is different, estimates of what an installation costs differ. This table shows estimated installed costs by property size and boiler type.

Property size (radiators)

Combi boiler system

System or regular boiler

1-bed flat or bungalow (4 to 5)

£2,000 to £3,500

£2,250 to £3,750

2 bed (6 to 7)

£2,500 to £4,200

£2,700 to £4,400

3 bed (8 to 10)

£3,000 to £5,150

£3,200 to £5,400

4 bed (11 to 13)

£3,750 to £6,150

£3,950 to £6,400

5 bed (14 to 16)

£4,450 to £7,150

£4,650 to £7,400

These are typical 2026 prices and your local quotes will differ. These estimates do not say whether VAT is included, so always ask your installer to confirm this.

Other 2026 estimates give a different view on the total cost. They put a one-bedroom flat at £3,000 to £4,000, and a two-bedroom flat or terrace at £3,500 to £4,800. For a three-bedroom semi-detached house, they estimate £4,000 to £5,500.

For larger homes, these estimates put a four bedroom detached house at £5,500 to £8,000, and a five bedroom detached property at £7,000 to £10,000 or more. The two sets of figures were worked out differently, so read them separately. That is why you must get specific quotes for your own home.

What makes up the price

Understanding how the costs break down can help you judge whether a quote is fair. The boiler itself makes up roughly 35 to 45 per cent of a full installation. Labour accounts for 20 to 30 per cent of the final bill.

The rest of the money goes on materials. Radiators take up 18 to 25 per cent of the cost, while pipework accounts for 15 to 20 per cent. The controls take 6 to 10 per cent, and a system flush and magnetic filter make up the final 3 to 6 per cent.

When you ask for a price, a proper written quote should normally include:

  • The boiler unit itself
  • All radiators and their valves
  • New pipework throughout the property
  • System filling and bleeding
  • Commissioning the new system
  • Safety checks and certification

Your choice of boiler will change the price. If you are unsure what you need, read our guide on choosing a combi, system or regular boiler to see which one suits your home.

Labour and how long it takes

A typical plumber day rate is about £170 to £310. The total labour for a full installation usually falls between £1,200 and £2,400. In London, labour can cost roughly £250 to £550 more than in the north or other areas.

Estimates of the days on site differ. Some put the work at four to eight days, often needing more than one engineer, while others suggest two to five working days.

Because the estimates vary so much, you should always ask for a programme of work in your quote. This tells you how many days the engineers expect to be in your home.

Extras that are often not included

Heating engineers focus on plumbing and gas work. They will lift your floorboards to run pipes, but their quote usually does not include making good and redecorating once the job is done. Refitting laminate flooring or carpets is also usually left to you.

If your home needs electrical upgrades, such as a new consumer unit, this is rarely included in the plumbing quote. Smart home features beyond a basic thermostat will also cost extra.

This table shows the typical costs for optional extras you might need to add to your installation.

Extra item

Typical estimated cost

Moving the boiler

£500 to £1,000

New gas supply

£2,000 to £4,000

Hot water cylinder (if switching from a combi)

£230 to £575

Removing the old system

Up to £480

Power flush

About £400

Smart thermostat

£140 to £370

Smart radiator valves

£30 to £80 per radiator

These are typical 2026 prices and your local quotes will differ. If you are keeping some of your old radiators, you might need a power flush to clear out the old sludge before the new boiler is connected.

Starting from no heating or storage heaters

Replacing a like for like system is typically estimated at £2,000 to £3,800. However, retrofitting central heating into a home with no heating at all is a much larger job, usually estimated at £5,000 to £10,000 or more.

If you are moving from old electric storage heaters, you will need to fit entirely new pipework throughout the house. You will also need a new heat source, which usually means a boiler or a heat pump. A new gas supply is one of the extras in the table above.

Heat pump or boiler

If you already have a working wet system and just need to replace the heat source, a boiler only fitted is typically £1,800 to £3,500. By contrast, heat pumps cost about £8,000 to £14,000 before any grants are applied.

Heat pumps are covered by the Boiler Upgrade Scheme in England and Wales. The scheme offers grants to help property owners replace fossil fuel or electric heating systems. No home is guaranteed to qualify, so check the scheme's eligibility rules on GOV.UK first.

Under the scheme, the cost of an air source heat pump can be reduced by a grant. In an off gas grid property replacing an electric heating system that is not already a heat pump, an air to water heat pump gets a £7,500 grant. Ground source heat pumps also get £7,500, while air to air systems get £2,500 and a biomass boiler gets £5,000.

If you decide to stick with fossil fuels, you can find more details in our new boiler cost guide. Oil boilers are usually fitted by OFTEC registered installers.

Rules, registration and certificates

By law, only a Gas Safe registered engineer may work on gas appliances. When the engineer arrives, ask to see their ID card. The back of the card shows exactly which types of appliance they are qualified to work on. You can also check their registration on the Gas Safe Register website.

Doing your own gas work is illegal and highly dangerous. The Health and Safety Executive advises that gas appliances are serviced at least annually. Landlords must arrange an annual gas safety check and give tenants the record.

Internal central heating usually needs no planning permission. However, boiler installation is notifiable under the Building Regulations. Installers who join a competent person scheme can self-certify this building work instead of getting building regulations approval. The schemes for a heating or hot water system include APHC, BESCA, Blue Flame Certification, Gas Safe Register, Certsure, HETAS, NAPIT and OFTEC.

For the pipes and radiators, there is no legal licence for general water plumbing. This is why qualifications and approved schemes matter. WaterSafe is the national register of approved plumbers, with approved contractor schemes run by APHC, CIPHE, SNIPEF and WIAPS. Its members are trained in the Water Fittings Regulations.

How to compare quotes

You should always ask for three itemised quotes when planning a full installation. A quote is a fixed price for the job. An estimate is not, and the final bill could be much higher if the work takes longer than expected.

Make sure the quote details exactly what is included, such as parts, materials, and whether VAT is added to the final total. Avoid large cash payments up front with no paperwork.

Under the Consumer Rights Act 2015, a service must be carried out with reasonable care and skill. If the work is poor, the customer can ask for it to be put right at no extra cost. Services arranged by phone, online or at home usually carry a 14-day cooling-off period, though this does not automatically apply to urgent repairs you have asked for.

Common questions

Do I need planning permission for central heating?

Internal central heating usually needs no planning permission. However, the boiler installation itself is notifiable under the Building Regulations. A registered installer can self-certify the work through a competent person scheme instead of getting building regulations approval.

How much does it cost to fit just the radiators?

Fitting new radiators costs about £150 to £400 each. This is the fitted price. If you need smart radiator valves added, expect to pay £30 to £80 per radiator.

Can I stay in the house while central heating is installed?

Ask your installer whether you can stay in the house during the work. A full installation is disruptive, so ask for a programme so you know what to expect.

Who is responsible for the water pipes?

The water company is responsible for the water main and the supply pipe up to your property boundary. As the property owner, you are responsible for the pipes on your land and all the plumbing inside the building.

What should I do if I smell gas?

If you smell gas, call the National Gas Emergency Freephone on 0800 111 999, open all doors and windows, and shut off the gas at the meter control valve if you know where it is. Do not switch any electrics on or off.

Next steps

Before you hire a heating engineer for a full installation, make sure you:

  • Decide whether you want a combi, system or regular boiler
  • Ask three different heating engineers for a detailed written quote
  • Check the quote includes lifting floorboards, filling the system and safety checks
  • Confirm whether the final price includes VAT and all materials
  • Ask to see the installer's Gas Safe ID card when they arrive

Once you know what the job involves and what your quote should include, you can find a plumber near you to get the work started.

Find a top rated plumber near you

4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plumbers

Matt Sutherland
Written by

Matt is a writer and editor for Top Rated Plumbers, covering plumbing, heating and boilers. When he's not writing guides, he spends weekends walking in the Peak District.

Looking for a trusted plumber? Browse our verified listings.

Find a Plumber