If you live in an older home you might find a large cold water storage tank in your loft. This tank is found in homes with a vented system, which means a regular or system boiler setup with a hot water cylinder that is usually fed by gravity from the loft. Homes with a combi boiler typically have no loft tank at all. Whether your tank can go depends entirely on how your whole heating and plumbing system is arranged. This guide explains what the tank does, why the overflow pipe drips and what the rules are for altering or removing it.
What the water tank in your loft is for
A loft water tank is technically known as a cold water storage cistern. It stores water for drinking, washing, bathing or other purposes requiring the water to be wholesome. In a traditional vented plumbing setup this stored water provides the daily supply for your bathrooms and your hot water cylinder.
The official water regulations guidance gives four specific reasons for using a cold water storage cistern:
- Providing backflow protection.
- Providing a reserve supply of water during a disruption to the mains network.
- Reducing maximum demand.
- Reducing supply pressure.
Water Regs UK states that if a premises has any form of mains water supply, the water fittings regulations apply. In Scotland, byelaws apply. This means the tank and its connected pipes must meet strict legal standards to keep your household water safe to use.
Does your home need a loft water tank?
Whether your home needs a cold water tank in the loft depends entirely on the type of boiler and hot water system you have installed. If you have a combi boiler you typically have no loft tank. A combi boiler takes cold water directly from the incoming mains supply and heats it instantly on demand, so no storage is required.
If you have a vented system, the loft tank is an essential part of the setup. A vented system relies on a regular or system boiler working alongside a hot water cylinder. Systems that heat both primary and secondary circuits are typically either vented or unvented. In a vented setup, the tank in the loft feeds cold water down to the cylinder.
Every hot water and heating system must be able to accommodate thermal expansion. If you are wondering whether to switch to a different boiler setup, you can read the guide on choosing a combi, system or regular boiler.
A qualified plumber or heating engineer will confirm what a given system needs to work safely. Where the plumbing work touches a boiler, it is strictly a job for a Gas Safe registered engineer. DIY gas work is illegal.
What the tank feeds in a vented system
In many older homes the loft tank holds a large volume of cold water that feeds directly into the hot water cylinder. The cylinder usually sits in an airing cupboard on the floor below and heats the water for your baths, showers and hot taps. The loft tank replaces the water in the cylinder as fast as you draw it off.
The same tank often feeds the cold water taps in your upstairs bathrooms and sometimes the downstairs toilets. Because the tank is located high up in the loft, gravity creates the water pressure for these taps and showers. The higher the tank sits above the shower head or tap, the better the gravity fed pressure will be.
The kitchen cold tap is usually fed directly from the incoming mains supply pipe rather than the loft tank. This ensures you have fresh, high pressure mains water for drinking and cooking. The tank in the loft provides the rest of the household supply, acting as a large buffer between the mains network and your daily usage.
Rules for the lid, insulation and overflow pipe
A cold water storage cistern must be designed and installed to keep the stored water clean and safe. The water regulations set out how the tank must be covered and insulated.
The Water Regs UK guidance says a cistern needs a rigid, close fitting and securely fixed lid or cover. Under Schedule 2 paragraph 16(4), the cover must be positioned so as to exclude light and insects. The cistern and its lid should be made of materials that will not shatter or fragment when broken, and the entire unit must remain watertight.
Thermal insulation is required to minimise freezing or undue warming. Cold water storage and distribution should be designed to stay at or below 20°C. The aim is to minimise the risk of contamination from microbial growth. You can read more about protecting your plumbing in the guide on how to stop pipes freezing in winter.
Fittings should not sit where heat sources or sunlight can reach them unless they are protected. It is good practice to insulate both hot and cold pipework to prevent undue warming. Stored water should keep turning over and the tank must be sized correctly for the occupancy and usage of the house to avoid stagnation.
Every storage cistern must have an overflow pipe and a suitable means of warning of an impending overflow, which is usually a warning pipe. These pipes must slope downward, exclude light and insects, and must not discharge into another cistern. The discharge from the warning pipe must be safe and visible.
Why the overflow pipe is dripping
If you see water dripping or running from a pipe on the outside of your house near the roofline, it is usually the warning pipe from your loft water tank. A dripping overflow usually means the float valve inside the tank is not closing properly, or water is entering the tank faster than it leaves.
Inside the tank an inlet valve controls the incoming mains water. According to Water Regs UK, this valve must shut off at a set level to prevent the tank from overfilling. Float valves must be adjustable so the valve closes at a defined level, and they must be securely and rigidly fixed.
The cistern itself should be adequately supported to avoid distortion. Float valves and other controls should be readily accessible for inspection, cleaning and maintenance. A servicing valve is also required on the inlet pipe right next to the cistern so the water supply can be isolated easily.
If the overflow drips or runs steadily, turn off the supply at the stop tap and call a plumber. Do not try to fix or adjust the valves yourself. A plumber will fit or adjust the valve safely. Water leaking or overflowing in a loft can damage the ceilings below, so act quickly.
Replacing or removing a loft water tank
If you are upgrading your heating system or reclaiming loft space, you might want to remove the old cold water tank. A plumber will first assess what the tank feeds to ensure the rest of your system keeps working.
Redundant pipework left behind after a tank is removed is known as a dead leg. Dead legs are a potential source of contamination, so the plumber should remove them. If removal is not fully possible, any blind end should be as short as possible.
When a new tank is fitted or a system is altered, every water system must be tested, flushed and where necessary disinfected before it is first used.
Do not remove a cistern without first consulting the water undertaker, as it may be providing backflow protection downstream. The page that gives this advice describes itself as non-statutory guidance. The local water undertaker can confirm whether removal needs notifying.
What the water rules say about cisterns
The Water Supply (Water Fittings) Regulations 1999 apply in England, Wales and Northern Ireland, and byelaws apply in Scotland, wherever a premises has a mains water supply.
Under Schedule 2 paragraph 16 of the Water Supply (Water Fittings) Regulations 1999, every storage cistern shall be so installed as to minimize the risk of contamination of stored water. The rules dictate the strict need for thermal insulation, an overflow pipe that excludes insects, and a cover positioned to exclude light.
Under regulation 5, a person planning to install certain water fittings must notify the water undertaker before starting work. The water undertaker must be given advance notice of proposed plumbing work. In Scotland this is covered by byelaw 5.
The local water undertaker usually needs advance notice of a new cistern installation, and they can confirm whether a specific job like removing an old tank requires notification.
Who should do the work
Plumbing work involving a cold water storage tank should be carried out by a competent and qualified professional. There is no single legal licence for general water plumbing in the UK, which is why official qualifications and approved schemes matter.
You should look for a WaterSafe approved plumber. WaterSafe is the national register of approved plumbers, with approved contractor schemes run by APHC, CIPHE, SNIPEF and WIAPS, and its members are trained in the Water Fittings Regulations.
Under the Consumer Rights Act 2015 a service must be carried out with reasonable care and skill. If a plumber fits a tank poorly, the customer can ask for poor work to be put right at no extra cost. Services arranged by phone, online or at home usually carry a 14-day cooling-off period, but this does not automatically apply to urgent repairs the customer has asked for, such as fixing a severely leaking loft tank.
If replacing or removing the tank involves altering the boiler or the gas supply, that specific part of the job must be done by a Gas Safe registered engineer. The engineer's ID card shows which types of appliance they are qualified for, and registration can be checked with the Gas Safe Register. The Health and Safety Executive advises that gas appliances are serviced at least annually. Landlords must arrange an annual gas safety check and give tenants the record. The gas emergency number is 0800 111 999.
Common questions
What is a hot water tank in the loft?
People often search for a hot water tank in the loft, but the large tank in the loft usually stores cold water. This cold water feeds down into the actual hot water cylinder, which is usually located in an airing cupboard on the floor below. The loft tank itself is designed to stay at or below 20°C to prevent bacterial growth.
Can I fit a loft water tank cover myself?
Water Regs UK guidance says a loft water tank cover should be rigid, close fitting and securely fixed, and the regulations say the cover must exclude light and insects. It must also be made of materials that will not shatter or fragment when broken. Because a poorly fitted cover can lead to contaminated household water, you should ask a qualified plumber to supply and fit the correct lid to ensure it meets the strict water regulations.
Why is my overflow pipe dripping constantly?
A dripping overflow pipe usually means the float valve inside your loft tank is failing to close at the defined level. It can also mean water is entering the tank faster than the system can handle. You should turn off the water supply at the stop tap and call a plumber to adjust or replace the valve safely.
Do I still need a water tank for my loft?
If your home runs on a traditional vented system with a regular or system boiler and a hot water cylinder, you still need the loft tank to feed the cylinder. Whether a tank can go if you change boiler type depends on how the whole system is arranged, so ask a plumber or heating engineer.
Who is responsible for the water pipes in my home?
The water company is responsible for the main and the pipe up to the property boundary. The property owner is responsible for pipes on their land and inside the building.
What to do next
If you have a problem with your loft water tank or you are planning a heating upgrade, follow these practical steps to protect your home and comply with the water regulations.
- Turn off the water supply at the main stop tap if the overflow pipe is running steadily or water is leaking into the loft.
- Do not attempt to adjust float valves, fit covers or alter loft pipework yourself.
- Consult your local water undertaker before removing a cistern to ensure you are not removing essential backflow protection.
- Check that your chosen plumber is WaterSafe approved and trained in the Water Fittings Regulations.
- Ask the plumber to provide a fixed written quote that clearly states whether VAT, parts and materials are included.
- Check the Gas Safe Register for a qualified engineer if the work involves replacing or moving a gas boiler.
Taking the right advice early can help limit water damage. When you are ready to get the problem fixed or discuss a system upgrade, you can find a plumber near you to assess your loft tank and provide a proper written quote.
Find a top rated plumber near you
4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: