Cost Guides

Kitchen Sink Replacement Cost and What Is Involved

What replacing a kitchen sink costs in 2026: like for like swaps, new taps and waste, undermount and Belfast sinks, moving the sink, time taken, and what to check in the quote.

Illustration of a kitchen worktop with a sink cut-out, a new sink, a tap and waste fittings laid out beside it

Replacing a kitchen sink with a like for like swap in the same place typically costs a few hundred pounds in 2026 and takes a few hours. Moving the sink to a new position or changing the layout requires more work and will cost considerably more.

How much does it cost to replace a kitchen sink

The total cost of replacing a kitchen sink depends heavily on the type of sink and whether you are changing the layout. Typical 2026 prices show that an average overall cost for a complete sink and taps job is £275. A straightforward like for like total, including the sink and the labour, typically ranges from £150 to £330.

Estimates vary, and some price lists put a like for like inset swap reusing the existing tap and waste at between £150 and £280. If you are planning bigger jobs, such as modifying base units or fitting high end extras, the total price can reach up to £1,500.

The table below shows typical 2026 total prices for different replacement scenarios.

Replacement scenario

Typical total cost

Like for like inset swap reusing tap and waste

£150 to £280

New inset sink, new tap and new waste

£280 to £550

Composite sink with quality mixer tap

£400 to £750

Undermount sink into existing worktop

£500 to £950

Belfast sink with base unit modification

£600 to £1,100

Boiling water tap with sink

£700 to £1,500

Moving a sink to a new location

£400 to £750

These figures represent typical 2026 prices. Local quotes will differ depending on your property and the plumber you choose.

What a plumber charges for labour

Labour makes up a significant part of your final bill. The amount you pay depends on how much pipework needs altering and how heavy or complex the sink is. For a straightforward like for like replacement, labour is usually between £75 and £150.

If the job involves replacing both the sink and the taps at the same time, the labour cost rises to between £100 and £180. Jobs that require minor pipework adjustments take longer, bringing the labour charge to between £150 and £250.

The material of the sink also changes the labour price. Fitting an inset stainless steel sink costs between £120 and £220 in labour. Fitting an inset composite or granite sink costs between £150 and £250.

Undermount installations require more precision to ensure a watertight seal against the worktop. Labour for an undermount sink starts from around £150 and often ranges between £250 and £450. Belfast or butler ceramic sinks are very heavy and need careful physical handling and alignment, meaning labour is typically between £300 and £600.

Where you live affects the hourly or daily rate you will pay. In London and the South East, plumbers typically charge between £45 and £75 per hour, or £250 to £400 per day. In the North, the Midlands, parts of Wales and Scotland, rates are usually between £35 and £55 per hour, or £180 to £300 per day. You can find more detail by checking what a plumber charges per hour or per day in your area.

Sink prices, taps and extra materials

The physical sink unit is the other main cost. Prices vary widely based on the material you choose. Stainless steel sinks are the most common and the most affordable. They are lightweight, highly resistant to heat, and easy for a single plumber to handle.

Composite sinks are made from a tough mix of resin and quartz or granite dust. They are heavier, scratch resistant, and cost more to supply. Ceramic sinks offer a traditional look that suits older properties, but they require great care during installation to avoid chipping the glazed surface.

Cast iron sinks are the most durable and the most expensive option. Because of their extreme weight, they require sturdy base units and cost significantly more to buy.

The table below shows typical supply costs for different sink materials and the labour costs for specific tasks.

Item or plumbing task

Typical 2026 price

Stainless steel sink supply

£70 to £180

Composite sink supply

£100 to £250

Ceramic sink supply

£120 to £300

Cast iron sink supply

£350 to £800

Labour for like for like replacement

£75 to £150

Labour for sink and taps replacement

£100 to £180

Labour for minor pipework adjustments

£150 to £250

Labour for moving a sink to a new location

£250 to £500 or more

These figures are typical 2026 prices. Local quotes will differ based on the exact brand and size you buy.

Taps are usually priced separately from the sink unit. A new set of taps will add between £30 and £250 to your overall material costs. You will also need a new waste and trap, which connects the sink to the drainage pipework and costs between £15 and £40.

If you want a waste disposal unit fitted beneath the sink, expect to pay the price of the unit itself plus an extra £80 to £200 in labour. A waste disposal unit requires a switched fused spur, so a qualified electrician must do the electrical work safely.

A boiling water tap is another popular extra that provides instant hot water. This requires a power supply, meaning an electrician visit is necessary if you do not already have a suitable socket under the counter. If you are fitting an undermount sink into a stone or quartz worktop, the hole must be cut with specialist tools. A stone or quartz worktop cut out adds between £80 and £250 to the job.

Cost by type of job

A like for like swap means fitting a new sink of the exact same size into the exact same hole in the worktop. The plumber can usually reuse the existing hot and cold water feeds and the waste pipework without cutting or extending them. This is the cheapest and fastest option because it requires no structural changes.

Changing the sink type or size means the existing cut out in the worktop may not fit. Modifying a standard laminate worktop costs between £100 and £200. If you are switching from an inset sink that rests on top of the counter to an undermount sink that sits beneath it, the plumber will need to adjust the pipework to match the new depth.

Fitting a large Belfast sink often requires modifying the wooden base unit that supports it. The cabinet must be altered to bear the heavy weight of the thick ceramic and the large volume of water it holds, which takes more time and carpentry skill.

All plumbing work must meet strict rules designed to keep drinking water safe and prevent contamination. The Drinking Water Inspectorate advises that property owners and anyone doing plumbing work must ensure it meets the Water Supply (Water Fittings) Regulations 1999. The official advice recommends using a plumber who is a member of the WaterSafe scheme. Approved contractors are fully trained in the water regulations, carry public and employers liability insurance, and offer an independent complaints procedure.

Moving the sink to a new position

Moving a sink to a completely new location in the kitchen is a major job. It costs between £400 and £750 in total, and the labour alone ranges from £250 to £500 or more.

This work involves running new hot and cold water supply pipes under the floor or behind the cabinets to reach the new position. The floorboards may need to come up to lay the new pipes, or they may need to be hidden behind the plinths of your kitchen cabinets. This adds considerable time to the job and explains why the labour costs are so much higher.

The plumber will also need to install new waste pipework and ensure it has the correct fall. Water relies on gravity to drain away, so the pipe must slope downwards continuously toward the outside drain.

This kind of structural change is usually done as part of a larger kitchen renovation rather than a simple repair. If you are redesigning your kitchen and adding new appliances at the same time, you might want to check the costs to plumb in a washing machine or dishwasher.

How long the job takes

The time it takes to fit a kitchen sink depends entirely on the type of installation and the condition of your existing pipes. The average time for a general sink replacement is two to four hours.

A simple like for like replacement or an inset swap usually takes between one and four hours, with two to three hours being typical. Fitting a new sink that requires minor pipework changes takes slightly longer, usually between three and five hours.

Installing an undermount or Belfast sink usually takes a full day. It can easily take longer if the base unit or the worktop needs extensive modification before the heavy sink can be secured safely.

Moving a sink to a new location takes between one and two days because of the extra pipework and floor access involved. Adding a boiling water tap adds an hour or two to the plumbing work, plus the extra time needed for an electrician to fit the power supply.

What pushes the price up and what to ask for in a quote

Several factors determine whether your quote will sit at the lower or higher end of the typical price ranges.

  • Choosing a like for like swap keeps costs down because the existing pipes and worktop hole can be reused.
  • Moving the sink to a new position pushes the price up because it needs new feeds, new waste pipework and possibly worktop alterations.
  • The sink material, size and bowl configuration affect both the supply price and the physical effort needed to lift and fit it.
  • The type of tap plays a part, especially if you choose a boiling water tap that requires electrical work.
  • A top mount or inset sink is cheaper and faster to fit than an undermount sink.
  • The condition of your existing plumbing matters greatly, as older homes may have corroded pipes that take longer to adapt.
  • Your location changes the final price, with labour rates in London and the South East generally being higher.

A quote is a fixed price that cannot be changed once agreed, whereas an estimate is only a rough guess. You should always insist on a written quote before allowing any work to begin. When you receive a quote, you should check the details carefully.

  • Ask if the price includes the supply of the sink and the taps, or if you are expected to buy them yourself.
  • Check that the quote covers all necessary hidden parts such as the waste, the trap and any extra pipework.
  • Confirm whether the cost of taking away and disposing of the old sink and its packaging is included in the price.
  • Make sure the document states clearly whether VAT is included in the final figure.
  • Ask if the plumber charges a call-out fee that covers the first hour, or if they operate on a minimum charge basis.

Common questions

Can I replace a kitchen sink myself?

Replacing a kitchen sink involves ensuring watertight seals and correct pipe connections. If you get it wrong, a slow leak can rot your kitchen units and ruin your flooring. DIY plumbing is not as easy or cheap as it looks, and fixing a poorly fitted sink will cost more than hiring a professional in the first place.

Do I need a new waste and trap?

It is always sensible to fit a new waste and trap when replacing a sink. Old plastic traps become brittle and their rubber seals degrade over time, making them prone to leaking if they are disturbed. A new waste and trap only costs between £15 and £40 and gives you complete peace of mind.

Will a new sink fit my old worktop?

A new sink will only fit the old cut out perfectly if it has the exact same dimensions and bowl configuration as the old one. If the new sink is smaller, it will fall through the hole. If it is larger, the worktop will need to be cut, which adds to the labour cost.

Who is responsible for the pipes under the sink?

The property owner is responsible for all plumbing pipes inside the building and on their land. The local water company is only responsible for the water main in the street and the supply pipe up to the boundary of your property.

Next steps for your sink replacement

Before you hire a plumber, make sure you have a clear plan for what you want to achieve and prepare your kitchen for the work.

  • Decide if you want a simple like for like swap or a completely new sink type and kitchen layout.
  • Measure your existing sink carefully if you want to keep your current worktop without paying for modifications.
  • Clear out the cupboard under the sink completely so the plumber has immediate access to the pipes and the wall behind them.
  • Turn off the water at your inside stop tap to check that it works and stops the water flow completely. If you are unsure where yours is or how to turn it, read about stopcock replacement cost and location.
  • Switch off the electricity at the mains if you have a sudden water leak near electrical sockets and it is safe to reach.
  • Ask three local plumbers for a written quote that includes VAT, materials and the disposal of your old sink.
  • Check that the plumber is registered with a recognised scheme such as WaterSafe to ensure they understand the water regulations.

Taking the time to choose the right sink and a competent tradesperson means your new kitchen plumbing will be reliable and leak free for years to come. When you are ready to get quotes and compare prices, you can find a plumber near you through our directory.

Find a top rated plumber near you

4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plumbers

Kerry Evans
Written by
Kerry Evans Writer

Kerry researches and writes guides for Top Rated Plumbers, turning prices, rules and official guidance into plain advice for homeowners. She is slowly working through every Agatha Christie novel.

Looking for a trusted plumber? Browse our verified listings.

Find a Plumber