The water company owns the water main and the pipe up to your property boundary, which is usually marked by their outside stop tap. You own the supply pipe from that boundary into your house, even if it runs under a path or neighbouring land, while shared pipes are the joint responsibility of everyone they serve. Your first call should always be to your water company, as they can confirm exactly where the fault is and whether they offer any help to fix it.
Water company pipes and your pipes
The water network is divided into clear sections of ownership, and knowing where the lines are drawn will tell you who has to pay for a repair. The water main is the large, high pressure pipe that carries water around your town or village. The water company owns this main completely. They also own the communication pipe, which is the short section of pipe connecting the main to your property boundary.
According to the Consumer Council for Water, the water company also owns the external stop tap and the water meter if there is one fitted in the ground. These components sit on the public side of the network. The ownership rules and company help described here are those of the water companies in England and Wales, so check with your own supplier.
You are responsible for the supply pipe. This is the private pipe that carries water from the property boundary into your house. You also own and maintain all the internal water pipes, valves and fittings inside your home. If a leak happens anywhere on the supply pipe or your internal plumbing, it is your responsibility to arrange the repairs.
Where the boundary is
Working out exactly where the water company pipe ends and your supply pipe begins is the first step in dealing with a leak. The boundary is usually the edge of the road or the public footpath where the water main is laid. The exact point where the pipe enters onto private land from the street is where your responsibility starts. The water company usually places their outside stop tap right on this boundary line to mark the change in ownership.
Property layouts can make this confusing. Your house might be set far back from the road with a long driveway. Your supply pipe might run under a public pavement, a shared alleyway or even through a neighbour's garden before it reaches your exterior walls. You are still responsible for the entire length of the supply pipe from the street boundary to your house, regardless of whose land it crosses.
Signs of a leak outside
A leaking supply pipe is buried underground, so you will rarely see a visible spray of water. The signs are usually slow and subtle. You might notice a patch of grass in your front garden that stays unusually green and damp, even during a dry summer spell. Puddles might form on your driveway when it has not rained. Over time, the escaping water can wash away the soil underground, causing your path or block paving to sink and become uneven.
A sudden and unexplained rise in your water bill can also be a warning sign. If you are on a meter, you will be charged for every drop of water that escapes through the split pipe. If you have ruled out obvious internal problems like a dripping tap or a running toilet, you might want to read the guide on how to detect a water leak to understand the next steps.
How to check your meter safely
If you have a water meter, you can use it to test whether the leak is on your outside supply pipe or inside your home. You must put safety first. Only check the meter if it is safe and easy to reach. You must never attempt to lift a heavy metal cover in the pavement yourself. If the meter has a light plastic lid, you can proceed with the test.
The Consumer Council for Water recommends a simple process to narrow down the location of the leak.
- Turn off all water using appliances in your home, including washing machines and dishwashers.
- Make sure no taps are running and no toilets are flushing.
- Look at the dials on your water meter to see if they are moving.
- If the meter keeps moving with everything off, you may have a leak.
- Find your inside stop valve and close it tightly.
- Check the water meter a second time.
- If the meter still moves with the inside valve closed, the leak may be on the outside supply pipe.
- If the meter only moves after you reopen the inside stop valve, the leak may be inside your property.
What to do first
If your meter test points to an outside leak, or you can see water pooling in your garden, your first action is to call your water company. They can confirm where the fault lies, including whether it is on their communication pipe or your supply pipe. Do not attempt to dig up the pipe yourself. You risk causing worse damage to the water pipe or striking hidden gas and electricity lines.
If you are a tenant, you must report the leak to your landlord immediately.
You might want to turn off the water to stop the leak from flooding your garden. You must be careful if you plan to use the outside stop valve. The WaterSafe register states that you may need to seek permission to operate the external stop tap even in an emergency. Some water suppliers do not allow residents to operate this valve at all. If you try to force a stiff valve and break it, you could be held liable for the cost of repairing the water company property. Always ask the water company on the phone what they want you to do.
Repair help and leak allowances
Finding out that the leak is on your section of the pipe can be a worry, but you might not have to bear the full cost. Some water companies offer one off help for domestic customers to locate and repair a leak on a supply pipe. The terms for this help vary significantly depending on the company. Some might offer a free repair, while others offer a subsidised service. Nothing is guaranteed, so you must ask your specific supplier what options are available to you.
A hidden leak can leave you with a massive water bill. Once the pipe is repaired, the water company should offer you an allowance for the lost water. This is a one off payment to cover the water that was lost. You should also contact your sewerage company to ask for a similar allowance. Sewerage bills are calculated based on the fresh water you use, but water lost through a leaking supply pipe never reaches the sewer.
You should also check your insurance policies. Some home contents insurance policies will cover the cost of lost metered water. If you live in a new build property, you should check your NHBC warranty or similar guarantee. Whether a leaking supply pipe is covered depends on the terms of the warranty.
What a supply pipe repair or replacement costs
If your water company does not offer a free repair scheme, you will need to hire a private contractor to fix or replace the pipe. Depending on the condition of the pipe, the contractor may recommend a repair or replacing the run from the boundary to the house.
Supply pipe replacement is priced per metre. Plumbers use two main methods to lay the new pipe. The traditional method involves digging a trench along the entire length of the pipe run. This is cheaper per metre but requires digging up lawns, lifting paving and restoring the ground afterwards. The alternative is a trenchless method known as moling. The plumber digs two small pits and uses a pneumatic machine to punch a hole underground between them. Moling costs more per metre but causes far less disruption to your garden and driveway.
The table below shows typical 2026 prices for laying a new water supply pipe.
|
Type of work |
Typical cost per metre |
|---|---|
|
Traditional trench method |
£100 to £125 |
|
Moling (trenchless method) |
£150 to £200 |
|
Overall average |
£150 |
These figures are typical 2026 prices, and the quotes you receive locally will differ. The total average cost for a replacement is £3,200, with typical jobs ranging from about £1,200 to £4,400 or more. The final price rises with the length of the run from the boundary to your house.
At the average price of £150 per metre, an eight metre run will cost about £1,200. A longer run of sixteen metres will cost about £2,400. A typical replacement job takes one to three days to finish.
When you ask a private plumber for a price, they should provide a proper written quote. A quote is a fixed price for the job, whereas an estimate is just a rough guess that can go up later. Your quote should clearly list the cost of the pipe, the labour, the digging method and the cost of making good the ground afterwards. You must always check whether VAT is included in the final figure.
Shared supply pipes
Some homes, such as certain flats and older terraced properties, may not have their own separate supply pipe. Instead, a single shared supply pipe runs from the water main and branches off to serve several different properties. Shared supply pipes serving more than one property are the joint responsibility of all the connected owners.
If a leak occurs on a shared section of the pipe, you and your neighbours are jointly responsible for it, and some water companies say all or only some of the owners may be responsible. Finding agreement can take time, so it is best to speak to your neighbours as soon as the water company confirms the pipe is shared.
A shared pipe also changes how you handle emergencies. The outside stop valve on the boundary controls the water for everyone on that branch. Water company guidelines state that you should only use this outside valve in an emergency, for example if there is a leak on the supply pipe between the outside and inside valves. Because shutting it off will also shut off your neighbour's water, you must tell them first before you turn the tap. If you need to turn off your own water for routine plumbing work, you should use your internal stop valve instead. If your internal valve is broken, you can read the guide on stopcock replacement cost to see what a plumber charges to fit a new one.
Choosing who does the work
There is no legal licence required for general water plumbing in the UK. This is why qualifications and approved schemes matter so much when you hire someone to work on your main water supply.
You should use a WaterSafe approved plumber for any work on your supply pipe. WaterSafe is the national register of approved plumbers. Its members belong to approved contractor schemes run by bodies such as APHC, CIPHE, SNIPEF and WIAPS. A plumber who is a member of these schemes is trained in the Water Fittings Regulations.
When you hire a plumber, you must ensure that you tell the water company about the repair. Ask the plumber whether they will do this for you. If the escaping water has washed mud and silt into your drainage system, you might also be dealing with a blocked outside drain. A competent plumbing firm can advise you on clearing the drains and restoring your driveway once the new supply pipe is safely in the ground.
Common questions
Does house insurance cover a leaking water pipe outside?
Insurance policies vary widely, so check what yours covers. Check your contents insurance, as some policies cover the cost of metered water lost through a leak. If you live in a recently built property, you should check your NHBC documentation or structural warranty to see if the pipework is still covered.
Can I fix my own main water supply pipe?
You should not attempt to dig up or repair a main water supply pipe yourself. You risk striking hidden gas or electrical lines, and you may need permission from the water company just to operate the external stop tap to turn the water off. You should hire a WaterSafe approved plumber who is trained in the Water Fittings Regulations.
How long does it take to replace a main water pipe?
A typical supply pipe replacement takes one to three days to complete. The exact time depends on the length of the pipe run and the method the plumber uses.
Do I have to pay for a leak on my side of the meter?
You are responsible for the supply pipe from the property boundary into your home, which means you are generally responsible for the repair costs. However, some water companies offer one off help to locate and fix a supply pipe leak for domestic customers. You should ask your supplier what options they provide, as terms vary by company.
Will shutting the outside stop tap affect my neighbours?
If you live in an older terraced or semi-detached house, you may share a single supply pipe with your neighbours. Shutting off the outside stop valve on a shared supply will cut off their water as well as your own. You must always tell your neighbours before you operate a shared valve.
Next steps
If you suspect a leak on your outside water pipe, these are the steps you should take to resolve the problem safely.
- Call your water company first to report the leak and ask if they offer any repair help.
- Perform a meter check only if it is safe to do so, without lifting heavy metal covers.
- Tell your landlord immediately if you rent the property.
- Speak to your neighbours if the water company confirms you are on a shared supply pipe.
- Ask your water company and sewerage company for a leak allowance once the pipe is fixed.
- Check your home contents insurance to see if it covers the cost of lost metered water.
If your water company does not offer a free repair and you need to hire a professional, you can find a plumber near you who is trained to safely replace your supply pipe.
Find a top rated plumber near you
4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: