Cost Guides

Leaking Shower Tray and Whether to Repair or Replace It

Is your shower tray leaking? How to tell if resealing is enough, when a crack or flex means replacing it, what a new tray and enclosure typically cost in 2026, and what hidden damage to watch for.

Illustration of a shower tray with a stained wall corner, a sealant tube and a putty knife

If the only fault is worn sealant, resealing your shower tray may be enough to stop a leak. If the tray is cracked, flexes underfoot or has already let water get underneath it, you usually need to replace it. A typical tray and enclosure swap costs roughly £450 to £2,500 in 2026 before any significant tiling or layout changes.

Signs your shower tray is leaking

If water is finding its way out of your shower, the signs often show up outside the cubicle first. You might notice a damp brown patch appearing on the ceiling of the room directly below. In the bathroom itself, the floorboards right next to the shower might start to feel soft or spongy underfoot.

Sometimes the signs are entirely inside the shower area. Worn sealant around the edges is one of the first things to check. Look out for these common signs that water is escaping:

  • Wear on the sealant around the tray edges
  • Mould building up heavily on the silicone
  • Cracking or lifting of the sealant away from the wall
  • Discolouration along the sealed joints
  • Water seeping under the tray or into the walls
  • Water damage, mould and flooring problems in the surrounding room

If you are unsure exactly where the water is coming from, it helps to narrow down the source before you call a professional. You can read more about how to detect a water leak to help you trace the path of the water.

Where the water usually gets in

Shower trays take a lot of weight and movement. Over time, this slight flexing can pull the tray away from the wall, breaking the waterproof seal. Once that silicone seal breaks, water runs down the wall and straight under the tray to the floorboards below.

Another common weak point is the shower waste. This is the drain hole and the plastic trap underneath it. If the trap works loose or the rubber washers wear over time, water can drip onto the floorboards. A plumber can check this for you.

Sometimes the water is getting through the walls rather than the tray itself. Grout between the tiles can crack and fall out, allowing water to seep behind the tiles and run down to the floor.

When resealing is enough

If your shower tray is solid, shows no signs of cracking and does not move when you stand on it, a leak might just be a simple sealant failure. When the only fault is worn sealant, resealing may be enough.

Applying new silicone is a straightforward job, but it must be done right to create a lasting waterproof barrier. A rushed job will fail quickly and let water back under the tray. If you decide to reseal the tray yourself or hire a tradesperson to do it, you must follow these basic rules:

  • Remove all old material because you should not apply a new shower sealant over the top of an old one
  • Keep the bathroom ventilated while you work and while the silicone cures
  • Allow at least 24 hours before you use the shower again so the seal sets completely
  • Never seal an electric shower against the wall because gaps are needed for ventilation

Taking the time to strip out every piece of old silicone is the most important step. New silicone will not stick properly to old silicone or to a wet, soapy surface.

When the tray needs replacing

Resealing will not work if the tray itself has failed. A cracked or leaking tray is a sign it needs replacing.

You also need to look at what is happening underneath. Enclosure seals that have deteriorated and are causing water damage are another sign the tray needs replacing. Water that has been getting through for some time can also damage the floor below, so ask the plumber to check it.

If your tray is in perfect condition and you only want to update the glass, you can keep an existing tray and replace only the enclosure. The new enclosure must be completely compatible with the old tray. However, replacing both the tray and the enclosure together is generally recommended. This helps the parts fit together and avoids mixing old and new.

What replacing a tray and enclosure costs

When you hire a plumber to replace the whole unit, the price depends heavily on the materials you choose. Acrylic trays are generally the cheapest and stone resin the dearest. The type of enclosure also changes the final bill, and a walk in enclosure costs the most.

The table below shows what you can expect to pay for the different parts of a replacement job.

Item or service

Typical cost

Acrylic shower tray

£50 to £300

Slate effect shower tray

£80 to £400

Ceramic shower tray

£100 to £500

Stone resin shower tray

£150 to £700

Quadrant enclosure

£200 to £600

Square enclosure

£200 to £650

Rectangular enclosure

£200 to £700

Walk in enclosure

£400 to £1,200

Basic installation labour

£150 to £350

Complex installation labour

£350 to £700

Removal and disposal

£50 to £200

These are typical 2025 prices, so allow for price rises since. They should not be added to the walk in shower figures below, which are 2026 prices. Your local quotes will differ, and prices vary by region.

Total package costs for a new shower

Plumbers often quote for the whole job as a single package. This includes the tray, the enclosure, the waste fittings, the sealants and all the labour required to fit them.

An economy package typically costs between £450 and £850. A mid range package costs between £850 and £1,500.

A premium package runs from £1,500 to £2,500 or more. Overall, you should budget roughly £450 to £2,500 for a full replacement. These package estimates exclude any significant tiling or layout changes.

Walk in shower replacement costs

If you are taking out a bath to fit a walk in shower, the costs are calculated slightly differently. This is a larger job that involves more labour and more making good once the bath is gone.

The bath removal alone typically costs £150 to £300. You then have the cost of the new walk in enclosure installation, which typically runs from £350 to £500. You may need some tiling once the bath is gone, which typically costs £20 to £50 per square metre. These walk in shower figures are 2026 prices, so do not add them to the table above.

The plumber will usually charge a day rate for this kind of work, which typically ranges from £300 to £400 per day. Ask the plumber how long the job will take.

Extras that raise the bill

When you are comparing quotes, check whether all the small essential parts are included. Waste fittings and plumbing connections typically add £20 to £100 to the materials bill. You also need to account for the chemicals that keep the water out. Sealants and waterproofing materials typically cost between £30 and £150.

Where you live also changes the price of the labour. In London, installation costs run about 15 to 30 per cent higher.

A complex installation will also push you into the higher labour brackets. If the plumber has to rebuild the floor, move the waste pipe across the room or work in a tight space, the job will take longer and cost more.

Waterproofing and tiling around the tray

Retiling around the shower may be needed to blend the new tray into the wall smoothly.

If you are doing extensive work or fitting a walk in shower, you need to think about waterproofing the walls and floor. Tiles, adhesive and grout are not waterproof alone.

To stop this, the walls behind the tiles need to be tanked. Tanking is a liquid membrane or a physical sheet that paints or sticks onto the bare wall before the tiles go on. A wet room should always be tanked. A basic tanking shower kit typically costs £130 to £180. If you are converting the space into a true wet room, full room tanking costs between £300 and £800.

If the water damage is severe and you decide to strip the whole room back to brick, you will be looking at a larger project. You can check typical figures for a new bathroom cost to see what a complete refit involves.

Limiting damage while you wait

If you suspect your shower is leaking, the most important thing is to stop using it immediately. Every time you run the water, you are adding to the hidden damage under the floor. If water is dripping through the ceiling below, put a bucket down to catch it and lay old towels around the splash zone.

Water and electricity are a dangerous combination. If water is leaking near light fittings or electrics in the ceiling below, and it is safe to reach your consumer unit, switch off the electricity at the mains. Call a qualified electrician to check the wiring before you turn it back on.

Do not attempt to take apart electric showers or wet light fittings yourself. Leave all electrical testing to a professional.

How to choose who does the work

There is no legal licence required for general water plumbing in the UK. This means anyone can call themselves a plumber, which is why you need to choose carefully.

Look for a plumber who is registered with a recognised scheme. WaterSafe is the national register of approved plumbers, and its members are trained in the strict water fittings regulations. When you ask for a price, insist on a written quote rather than an estimate. A quote is a fixed price for the job, while an estimate is just a guess that can increase later.

Make sure the quote includes the removal of your old tray and all the waste materials. Be cautious of call handling firms that pass jobs on at inflated rates, and always check whether the price includes VAT.

If you are taking the opportunity to upgrade your shower unit at the same time, you can compare a mixer shower installation cost to see if a different type of valve would suit your heating system better.

Common questions

Can you put a new shower tray over an old one?

Ask your plumber whether the old tray needs to come out first. If water has been leaking, they will want to check the floor underneath before fitting anything new.

How long does it take to fit a new shower tray?

The time depends on the job. A like for like swap is quicker than one where the floor needs repair, the plumbing needs moving or the walls need retiling and tanking, so ask your plumber for a timeline in the written quote.

Do plumbers tile around the shower tray?

Many plumbers are happy to do a small amount of tiling to make good the bottom row above a new tray. For larger jobs like full wall tiling or building a wet room, they might bring in a dedicated tiler to ensure a perfect finish.

Who removes the waste when a shower is replaced?

Your plumber should remove the old tray, glass and rubble, but you must check this is included in your quote. Waste disposal carries a cost, and if it is not in the contract, you may be left to take the heavy parts to the local tip yourself.

Next steps

Before you hire someone to rip out your leaking shower, follow these steps to get the right fix:

  • Stop using the shower immediately to prevent further water damage to your floors and ceilings
  • Check the silicone sealant for black mould, lifting edges or deep cracks
  • If the tray is cracked or the floor is spongy, prepare for a full replacement rather than a simple reseal
  • Ask three local plumbers to look at the job and provide fixed written quotes
  • Check that each quote includes the cost of waste removal, parts, sealants and VAT

A plumber who inspects the leak first can tell you whether resealing or replacement is needed. You can use our directory to find a plumber near you who can assess the leak and give you a firm price to put it right.

Find a top rated plumber near you

4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 plumbers

Hamza Iqbal
Written by
Hamza Iqbal Researcher

Hamza writes for Top Rated Plumbers, with a focus on helping homeowners compare quotes and ask the right questions. Away from the desk, he follows county cricket through thick and thin.

Looking for a trusted plumber? Browse our verified listings.

Find a Plumber