HETAS is a not for profit organisation offering a competent person scheme for installers of biomass and solid fuel heating. A HETAS registered installer can self-certify their work to building regulations instead of you getting building regulations approval. At the end of the job, you should end up with a certificate of compliance, which HETAS provides only in England and Wales.
What HETAS is
HETAS is the only competent person scheme specialising in the installation of solid fuel and biomass appliances. It is a not for profit organisation, and its contact number is 01684 278170.
In the building trade, a competent person scheme is a register an installer can join to self-certify certain types of building work. This route acts as an alternative to getting building regulations approval directly from your local authority. With a registered installer, the installer notifies the work for you, as described below.
Why a stove installation needs sign-off
A stove installation has to meet building regulations, and the routes are a competent person scheme or local authority building control. Using a HETAS installer is one route, not a legal requirement in itself.
GOV.UK lists HETAS Limited as a competent person scheme for combustion appliances. This specific listing covers solid fuel, including biomass, as well as heating or hot water systems and associated controls. A registered installer notifies the work through HETAS, as described below. The GOV.UK listing also mentions some plumbing and microgeneration work, so ask exactly what an installer's registration covers for your job.
Failing to notify the local authority about your new stove can lead to enforcement action.
What a HETAS registered installer can do
A HETAS registered installer is a tradesperson who is trained and assessed to carry out compliant work. HETAS says registered installers can cover stoves, boilers and biomass appliances.
Once the physical installation is complete, the installer handles the legal reporting. HETAS registered installers notify work through the HETAS Technical Hub.
HETAS sends the records from the Technical Hub to local authorities every Tuesday.
The certificate of compliance you should receive
The final step of the installation process is receiving your official paperwork. You should receive a HETAS certificate of compliance to keep for your records. HETAS says the certificate demonstrates that the installation complies with the relevant Building Regulations.
The rules for these certificates depend on where you live. Certificates of compliance are provided after installation only in England and Wales. In England and Wales it is used to notify your Local Authority Building Control Department and takes the place of a Local Authority Building Notice.
HETAS says the certificate should arrive within 2 weeks via Royal Mail. Keep it safe with your other house paperwork.
How to find and check an installer step by step
Finding a qualified installer takes a few minutes of research. You must verify their details before you agree to any work or hand over any money. Follow these steps to find and check a tradesperson.
- Go to the HETAS installers page and look for the Find Installer tool.
- Enter your full postcode to search for a HETAS Installer for solid fuel, wood and biomass appliances.
- Use the Expand radius option on the map if your initial search turns up no results nearby.
- Ask to see the installer's HETAS ID card when you collect quotes.
- Use the Check Business tab on the website to search by the firm's business name or their 4 digit HETAS Company ID.
- Call HETAS Consumer Support on 01684 278170 if you need help, as they are always happy to verify details of registrants with you directly.
- Check the Removed Business Register on the website if you cannot find a business you are looking for.
Keep in mind that the online postcode search covers England, Wales, Scotland and the Channel Islands, even though the certificates of compliance are only issued in England and Wales.
What HETAS registration does not tell you
While registration shows an installer is trained and assessed for solid fuel work, it does not guarantee every aspect of the service you receive. You still need to approach the job as a careful consumer and ask the right questions about pricing and standard business practices.
The table below outlines what HETAS registration shows and what it does not.
|
What registration shows |
What registration does not show |
|---|---|
|
The installer is trained and assessed for solid fuel work |
The final price of the stove or the installation labour |
|
They are registered to work on biomass appliances |
Whether the installer has insurance |
|
They can self-certify work to building regulations |
Anything about gas or oil heating work |
|
They will notify work through the Technical Hub |
A complete guarantee of workmanship or customer service |
HETAS registration is for solid fuel and biomass work. Gas and oil heating are separate matters. For oil, read our guide to oil boiler replacement cost.
Chimney sweeping and HETAS approved sweeps
Fitting a stove is only the beginning of looking after it. HETAS recommends that chimney sweeping is best carried out by a HETAS Approved Sweep at least once a year, depending upon the appliance and fuel.
Approved sweeps have obtained the necessary training to safely sweep the chimney. The frequency of your sweeps depends upon the appliance and the fuel you choose to burn. HETAS advises sweeping at least twice a year when burning wood or bituminous house coal. HETAS advises sweeping at least once a year when burning smokeless fuels.
Timing your sweeps correctly helps keep your heating system reliable. The best times to book a sweep are just before the heating season starts and after a stove has been unused for a long period.
Once the sweep is finished, you should receive documentation following your successful sweep. You can find an approved sweep in your area by entering your full postcode in the search tool on the HETAS sweeps page.
If you cannot find your certificate
Paperwork can easily go missing during a busy house move or simply get lost over the years. If you have recently had a stove fitted and the certificate has not arrived in the post after two weeks, you need to follow up with the scheme directly.
You should contact HETAS support within two months of the installation's completion. After that, a duplicate certificate fee applies.
Replacement certificates cost £36, as the HETAS page says at the time of writing. You can order this replacement document through the certificates page on the website by searching with your postcode or your original reference number.
If you have bought a house with a stove
A stove fitted before you bought the house may have come with a certificate of compliance, so it is worth asking the seller or your conveyancer for it. Certificates of compliance are provided after installation only in England and Wales, so a stove fitted elsewhere may have no HETAS certificate at all.
If the work was done through HETAS and the paperwork cannot be found, replacement certificates can be ordered through the HETAS site's search using a postcode or reference number. HETAS Consumer Support on 01684 278170 can also help to verify details of an installer who fitted the stove.
Questions to ask before a stove is fitted
Having a clear conversation with your installer before the work begins helps prevent unexpected bills and arguments later. A professional tradesperson will be happy to answer your questions and provide their credentials. Ask these questions when you are gathering prices.
- Can I see your HETAS ID card and check your 4 digit Company ID?
- Will you notify the local authority through the Technical Hub when the job is done?
- Can I check your business on the HETAS website using the Check Business tab?
- When should my certificate of compliance reach me, and does it cover England and Wales only?
- Will you provide the manufacturer instructions for the stove once it is fitted?
HETAS says the certificate should arrive within 2 weeks via Royal Mail, so ask the installer when to expect yours and keep it with your other house paperwork.
Common questions
Does a stove have to be fitted by a HETAS installer?
Not by law. The accepted routes are a competent person scheme such as HETAS, where the installer self-certifies the work, or building control through your local authority. Using a HETAS installer is one way to meet the rules, not a legal requirement.
Can a standard plumber install a wood burner?
To self-certify the job, the installer must be registered with a competent person scheme for solid fuel. Otherwise the work needs to go through building control.
Does HETAS registration cover gas work?
HETAS registration is for solid fuel and biomass work, and gas and oil heating are separate matters.
What does the Find Installer search cover?
It is a postcode search for a HETAS installer for solid fuel, wood and biomass appliances, and it covers England, Wales, Scotland and the Channel Islands. An Expand radius option appears if nothing turns up. Certificates of compliance are provided after installation only in England and Wales, so the search area is wider than the area where certificates are issued.
What is the Removed Business Register?
If you cannot find a business in the search, HETAS points to a Removed Business Register. A business you cannot find is worth checking there, and HETAS Consumer Support on 01684 278170 says it is always happy to verify details of registrants with you directly.
Who can verify an installer's details?
HETAS says its Consumer Support team are always happy to verify details of registrants with you directly. You can reach them on 01684 278170. You can also use the Check Business tab on the HETAS website to search by business name or 4 digit HETAS Company ID.
When do local authorities hear about the work?
HETAS registered installers notify work through the HETAS Technical Hub, and HETAS sends the records to local authorities every Tuesday. In England and Wales your certificate also takes the place of a Local Authority Building Notice.
How often should a stove chimney be swept?
HETAS recommends that chimney sweeping is best carried out by a HETAS Approved Sweep at least once a year, depending upon the appliance and fuel. It advises sweeping at least twice a year when burning wood or bituminous house coal, and at least once a year when burning smokeless fuels.
What happens if the local authority is not told?
HETAS says that failing to notify the local authority can lead to enforcement action. A registered installer notifies the work for you, and the certificate should arrive within 2 weeks via Royal Mail.
Next steps
If you are planning to install a wood burning stove or a biomass boiler, a few checks will help you find a registered installer and keep the right paperwork. Follow these steps.
- Use the online postcode search to find registered installers in your area.
- Ask at least three different firms to visit your home and provide a written quote.
- Check their ID cards and verify their business name on the official website.
- Ask how and when the work will be notified through the HETAS Technical Hub.
- Keep your certificate of compliance in a safe place once it arrives in the post.
HETAS says failing to notify the local authority can lead to enforcement action. When you are ready to gather quotes, you can find a plumber near you to help with the wider heating system. A listing on this site does not show whether someone is registered with HETAS.
Find a top rated plumber near you
4,869 plumbers across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: